RigExpert TI-7 – Specifications
General features:
- Transceiver audio interface for operating digital modes, voice recording and playback
- CAT (Computer Aided Transceiver) system
- FSK output
- PTT and CW outputs
- Squelch input
Computer connection:
- USB (Universal Serial Bus) connector
- Powered from the USB port (consuming 100 mA maximum)
- No external power supply needed
Transceiver connection:
- Single 25-pin connector for transceiver cable
- Various transceiver models supported
Audio interface:
- Insulated from digital nets
- Maximum input/output amplitude is 1V
- Input/output samplerate: 8 to 48 kHz
- True 16-bit DAC/ADC used
- Volume levels are adjusted by the front panel potentiometers
CAT serial port:
- Baudrate: 300-115200 baud
- Electrical compatibility: RS-232, CI-V, TTL or inverted-TTL (Yaesu, Icom, Kenwood, Ten-Tec, Elecraft and JRC transceivers)
PTT/CW outputs:
- PTT output: open collector and TTL-level
- CW output: open collector
- Maximum current is 500 mA
FSK output:
- Baudrate: 45-1200 baud
- Open collector output
System requirements:
- Desktop or laptop computer with USB 1/2/3 compliant port
- Windows 2000/XP/2003/Vista/7/8/10 (32- or 64-bit) operating system
- No USB drivers required
- The RigExpert Navigator software is provided free of charge
Dimensions: 11 x 13 x 4 cm
Weight: 0.3 kg
Operating temperature: 0…40 °C
Warranty: 2 years
RigExpert TI-7 is made in Ukraine.
Specifications are subject to change without notice.