General features:
- Transceiver audio interface for operating digital modes, voice recording and playback
- CAT (Computer Aided Transceiver) system
- FSK output
- PTT and CW outputs
- CW keyer (WinKey)
- Footswitch input
- Microphone input
Computer connection:
- USB (Universal Serial Bus) connector
- Powered from the USB port (consuming 100 mA maximum)
- No external power supply needed
Transceiver connection:
- Single 25-pin connector for transceiver cable
- Various transceiver models supported
Audio interface:
- Insulated from digital nets
- Maximum input/output amplitude is 1V
- Input/output samplerate: 8 to 48 kHz
- True 16-bit DAC/ADC used
- Volume levels are adjusted by the front panel potentiometers
- External microphone input with level control
- Recording QSO audio stream
CAT serial port:
- Baudrate: 300-115200 baud
- Electrical compatibility: RS-232, CI-V, TTL or inverted-TTL (Yaesu, Icom, Kenwood, Ten-Tec, Elecraft and JRC transceivers)
PTT/CW outputs:
- PTT output: open collector and TTL-level
- CW output: open collector
- Maximum current is 50 mA
FSK output:
- Baudrate: 45-1200 baud
- Open collector output
System requirements:
- Desktop or laptop computer with USB 1/2/3 compliant port
- MacOS/Linux/Windows 2000/XP/2003/Vista/7/8/10 (32- or 64-bit) operating system
- No drivers required for systems on Windows 10/MacOS/Linux
- For Windows 7 and previous versions of Windows only Winkey and FSK drivers are required
Supported software:
- MixW 2/3/4
- MMTTY, MMSSTV
- WSJT, WSJT-X, WSPR
- all other soundcard software!
Dimensions: 20 x 10 x 4 cm
Weight: 300 g
Operating temperature: 0…40 °C
Warranty: 2 years
GTIN code: 4820185420167
RigExpert TI-5000 is made in Ukraine.
Specifications are subject to change without notice.